Rib Lath
We own factory ISO9001 certificate of Rib lath, Rib Lath (Template Network), Rib Lath (3/8" High Rib) etc, galvanized rib lath is widely used as a background for plaster, render, stucco application in construction of suspended ceilings partition. Please contact with me if you interested in our rib lath products.
Shortening the Time (of construction)
- Easy to handle due to the light-weighted subsidiary materials (i.e. 1/10 weight of plywood)
- Improve the work efficiency
- Easy to dismantle
- Quick refilling-up
Cost Efficiency
- No skillful hand needed
- Cost savings of handling the form dismantling, disused materials and storage management
- Easy to work with
- Easy to bend into round form or right-angled side
- Curved surface
Minimizing the Space to install
- 1/20 of plywood in size
- Minimizing the storage space of material at the site
- Minimizing the cost of material handling
Excellence of Finished-work (plastering and tiling)
- Strengthening the level of adhesion through wire-net of skeleton surface
- Preventing the crack of plastering surface
- No prime plastering required
Quality Improvement of Concrete
- Easy to inspect the layout of reinforcing steel and easy to clean
- Ensuring homogeneous concrete strength(upper and lower parts)
- Restraining the surface crack
- Easy to strengthen the connection parts
- Improved earthquake-proof performance
Reduction of Wasted materials
- Nearly none of wastes after construction
- Easy clear and clean the site
Compatible with existing forms
Prevention of unreliable work
- Visibility of installation
- Preventing the quality deterioration by eliminating the surplus water
Improving the site safety
- Easy of handling with safety through the light-weight
- Excellent work results on the limited work space
3/8” RIB LATH (HIGH RIB)
Due to its heavy construction with seven longitudinal ribs, each 3/8” deep and eight small flat ribs it is used almost exclusively for ceiling and soffit applications. The herringbone mesh pattern allows excellent keying of the stucco to the lath for horizontal or
ceiing installations spanning up to 24” o.c. Rib lath is not generally recommended for vertical or wall installations.
 
Finish |
Wt.per Sq.yd |
Rib Height |
Sheet size |
Pes/Bid |
Yds/Bdi |
Yds/Pallet |
Galv. |
2.75 |
3/8" |
27"×96" |
10 |
20 |
1000 |
Galv. |
3.4 |
3/8" |
27"×96" |
10 |
20 |
1000 |
Galv. |
4.0 |
3/8" |
27"×96" |
10 |
20 |
1000 |
7ribs 8openings rib lath
 
Thickness mm |
Rib Height |
Rib Distance |
Size of Opening mm |
Sheet Width |
0.3 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.35 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.4 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.45 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.5 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.55 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
0.6 |
3/8" |
100mm (3 7/8") |
11×9mm(0.433×0.354") |
610mm (24") |
8ribs 8 openings rib lath
Thickness mm |
Rib Height |
Rib Distance |
Size of Opening |
Sheet size mm |
0.35 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
0.4 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
0.45 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
0.5 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
0.55 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
0.6 |
19mm(3/4") |
98.5 mm(3 7/8") |
9.5×6mm(0.375×0.234") |
686mm(27") |
9ribs 4 openings rib lath
Thickness mm |
Rib Height |
Rib Distance |
Size of Opening |
Sheet Width |
0.3 |
4mm(0.157") |
75mm(2.953") |
4.5×15mm(0.177×0.591") |
610/750mm(24"/291/2") |
0.35 |
4mm(0.157") |
75mm(2.953") |
4.5×15mm(0.177×0.591") |
610/750mm(24"/291/2") |
0.4 |
4mm(0.157") |
75mm(2.953") |
4.5×15mm(0.177×0.591") |
610/750mm(24"/291/2") |
0.45 |
4mm(0.157") |
75mm(2.953") |
4.5×15mm(0.177×0.591") |
610/750mm(24"/291/2") |
0.5 |
4mm(0.157") |
75mm(2.953") |
4.5×15mm(0.177×0.591") |
610/750mm(24"/291/2") |
5ribs 8 openings rib lath
Thickness mm |
Rib Height |
Rib Distance |
Size of Opening mm |
Sheet Width |
0.3 |
8mm(0.315") |
150mm(5.906") |
4.5×15mm(0.177×0.591") |
610mm(24") |
0.35 |
8mm(0.315") |
150mm(5.906") |
4.5×15mm(0.177×0.591") |
610mm(24") |
0.4 |
8mm(0.315") |
150mm(5.906") |
4.5×15mm(0.177×0.591") |
610mm(24") |
0.45 |
8mm(0.315") |
150mm(5.906") |
4.5×15mm(0.177×0.591") |
610mm(24") |
0.5 |
8mm(0.315") |
150mm(5.906") |
4.5×15mm(0.177×0.591") |
610mm(24") |
9ribs 8 openings rib lath
Thickness mm |
Rib Height |
Rib Distance mm |
Size of Opening mm |
Sheet Width |
0.3 |
8mm(0.315") |
75mm(2.953") |
10×17mm(0.394×0.669") |
610mm(24") |
0.35 |
8mm(0.315") |
75mm(2.953") |
10×17mm(0.394×0.669") |
610mm(24") |
0.4 |
8mm(0.315") |
75mm(2.953") |
10×17mm(0.394×0.669") |
610mm(24") |
0.45 |
8mm(0.315") |
75mm(2.953") |
10×17mm(0.394×0.669") |
610mm(24") |
0.5 |
8mm(0.315") |
75mm(2.953") |
10×17mm(0.394×0.669") |
610mm(24") |
|
